BG-71.1

A crystal clear film, for Colour Laser Printers using low fusing temperature toners. Ideally suited for overhead projection transparencies or see through overlays. The film uses the same universal coating on both sides, eliminating any confusion when inserting sheets into the feed tray.

High resolution (Download)

Cut sheets

Art. Number	Base/Nominal thickness (mm)	Format	Packing quantity
29711.100.84500	0.100	SRA3	200	Technical Datasheet

Suitable for Colour Laser Printer

Suitable for Colour Copier

Paper backed short side

Articlenr. 29711.100.84500

Characteristic

Suitable for Colour Laser Printer
Suitable for Colour Copier
True colour
Good flatness
Heat resistant
Highly universal
Excellent toner bonding

Finish

Clear transparent
Paper backed short side

Specifications

	Coating frontside	Laser & Copier colour
	Print side	Special coating for toner
	Back side	Paperbacked short side
	Base material	Polyester film
	Width (mm)	320
	Length (mm)	450
	Width (inch)	12.6
	Length (inch)	17.72
	Format	SRA3
	Base/Nominal thickness (mm)	0.100
	Base/Nominal thickness (mil)	4
	Packing quantity	200

Compatibility

For use on most Mono & Colour Laser Printers.
Please refer to the Folex Recommendation list to get the best film for your Printer or Copier.

Handling

Please follow the handling instructions supplied with this product as well as the Copier / Printer manufacturers manual.

Storage

Store in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.

BG-71.1

Cut sheets

Art. Number

Base/Nominalthickness (mm)

Format

Packingquantity