BG-71.6 RS

A crystal clear film, for Colour Laser Printers using low fusing temperature toners. Ideally suited for overhead projection transparencies or see through overlays. The film uses the same universal coating on both sides, eliminating any confusion when inserting sheets into the feed tray.

High resolution (Download)

Cut sheets

Art. Number	Base/Nominal thickness (mm)	Format	Packing quantity
29716.100.44100	0.100	A4	50	Technical Datasheet
29716.100.44000	0.100	A4	100	Technical Datasheet

Suitable for Colour Laser Printer

Suitable for Colour Copier

Removable stripe for sensor detection

Removable stripe long side

Articlenr. 29716.100.44100

Characteristic

Suitable for Colour Laser Printer
Suitable for Colour Copier
Removable stripe for sensor detection
True colour
Good flatness
Heat resistant
Highly universal
Excellent toner bonding

Finish

Clear transparent
Removable stripe long side

Specifications

	Coating frontside	Laser & Copier colour
	Print side	Special reactive coating for toner
	Back side	Removable paper stripe on the long side
	Base material	Polyester film
	Width (mm)	210
	Length (mm)	297
	Width (inch)	8.27
	Length (inch)	11.69
	Format	A4
	Base/Nominal thickness (mm)	0.100
	Base/Nominal thickness (mil)	4
	Packing quantity	50

Compatibility

For use on most Mono & Colour Laser Printers.
Please refer to the Folex Recommendation list to get the best film for your Printer or Copier.

Handling

Avoid moisture and fingerprints.
Please follow the handling instructions supplied with this product as well as the Copier / Printer manufacturers manual.

Storage

Once packaging is opened, store at a room temperature of 15 - 25°C and at a humidity of 30 - 60%
Store in a cool and dry place

BG-71.6 RS

Cut sheets

Art. Number

Base/Nominalthickness (mm)

Format

Packingquantity