A top coated anti-reflective polyester film for high resolution photographic poster prints, banners, floor graphics, point of sale, signage and pop up display panels that all require a completely glare free surface. The film is the ultimate in dimensional stability. It gives excellent flatness and colour contrast reproduction even when using high levels of ink, reducing the possibility of any media distortion. The film is tear resistant and has a tough textured scuff, scratch and chemical front resistant surface with an Ink Jet coating on the reverse side. ARF film offers excellent handling, dimensional stability and lamination properties. Images dry quickly. Production of floor graphics is simple and cost effective using just a two step system. Simply print the image in reverse and laminate it to Folajet white reversible adhesive and it’s finished. A front side protective laminate is therefore not required. HP/RS is a removable paper stripe version for Hewlett Packard plotters that require sensors to detect translucent film.
Articlenr. 20977.180.35900
Characteristic |
|
|---|
Finish |
|
|---|
Specifications |  | Coating frontside | Ink Jet |
|---|
| Print side | Glossy side |
|---|
| Back side | Scratch resistant |
|---|
| Base material | Polyester film |
|---|
| Width (mm) | 610 |
|---|
| Length (m) | 20 |
|---|
| Width (inch) | 24 |
|---|
| Length (ft) | 65.62 |
|---|
| Base/Nominal thickness (mm) | 0.180 |
|---|
| Base/Nominal thickness (mil) | 7.2 |
|---|
| Packing quantity | 1 |
|---|
|
|---|
Compatibility |
|
|---|
Handling |
A preconditioning period of 24 hours within the printing environment is recommended.
Outdside exposure (weathering):
up to 3 months without lamination possible, for longer periods lamination recommended. Between 15-30°C and 30-70% r.h. Print image in mirror mode in "best quality" Cold peeling of interleaving paper Use single side adhesive for non self-adhesive displays and signs or a double side adhesive for self adhesive displays and signs. Optimal between 15-30°C and 40-60% r.h. Avoid fingerprints on printing side. Lamination :cold or heat lamination. For outdoor application lamination is recommended. Before laminationg let the prints dry for minimum 2 hours.
|
|---|
Storage |
Unopened in original packaging storage time is minimum 1 year after shipment (under recommended storage conditions). Once packaging is opened, store at a room temperature of 15 - 25°C and at a humidity of 30 - 60 % Store in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.
|
|---|
