FOLAJET BACKLIT ES

Suitable for Piezo printers

Suitable for Eco Solvent Ink

Suitable for Solvent Ink

Improved water resistance

Brilliant, true colour reproduction with or without back lighting (Day&Night).

Can be used in front-print mode (right reading prints).

Good ink absorption

High whiteness for excellent contrast

Light-fast and wet smear resistant prints

Insensitive to condensed water inside the light box in outdoor applications.

Fast ink drying (if necessary activate heating system in the printer).

Single mat coated polyester

Useable on most large format Ink Jet printers using solvent ink systems (Eco-, Light-, Mild- Solvent inks and similar inks).

Not recommended for printing with oil or water based inks,

A preconditioning period of 24 hours within the printing environment is recommended.

Heating system in printer possible up to approx. 48°C. Higher temperature may cause film deformation.

Ink Load: approx. 260 - 300% (may vary according to ink system).

Between 15-30°C and 30-70% r.h.

Lamination: cold or heat laminates (low-temp) possible but not necessary due to water-proof prints.

Please follow the special handling instructions (instruction sheet).

Unopened in original packaging storage time is minimum 1 year after shipment (under recommended storage conditions).

Store in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.