REPROJET P HD

Suitable for Thermal Ink Jet printer

Suitable for Piezo Ink Jet printer

Suitable for pigment inks which offers improved light stability

Suitable for Dye Ink

Instant dry coating

High Ink Absorption

High visual contrast

Dot reproduction = up to 48 L/cm for screen printing application (depending on the combination system, higher screen rulings are possible)

Very fast ink drying

Optimal line and point sharpness

Wide range of linearization options

Good mechanical properties, handling

High dimensional stability and accuracy of registration

Transparent, slightly matt, nanoporous coating

Coated on reverse side for good slip properties and fast vacuum in the exposure unit frame

Good compatibility with screen and polymer emulsion surfaces

High density range:
DmaxUV: 3.2 up to > 4 (depending on RIP settings, ink system and measured spectral characteristics of the densitometer)
Dmin UV: approx. 0.06 to 0.12 (depending on the measurement characteristics of the densitometer).

Offers improved water resistance when compatible with waterbased pigment ink

Clear Surface

Prerequisite for a high ink coverag (copy density) are printers, which allow settings for high resolution and high ink loads. These various settings are often not available with the usual driver settings and can often be made for screen use only in combination with special RIP tools.
Due to this reason, desktop printers (A4, A3) also often do not offer the desired coverage.

Dependant on ink type dye ink can produce a migrating yellowing effect.

Optimal between 15-30°C and 40-60% r.h.

A preconditioning period of 24 hours within the printing environment is recommended.

Avoid fingerprints on printing side.

For demanding halftone and separation work, we recommend special RIP-Software tools such as COLORGATE-Filmgate, WASATCH, PERFECTPROOF etc in combination with LF printers like EPSON Stylus pro (Ultrachrome Photoblack/K3-inks), HP Z-series & CANON iPF-series.

For optimisation of halftones a linearization of the printer setting is essential

Dye-based image areas (inkjet-printing) show a typical absorption spectrum. Therefore a correct density measurement is possible only with an ultraviolet densitometer (eg. X-Rite 369).

For printers with two black inks, we recommend using Photo Black / Glossy Black.

To prevent sticking to the screen emulsion during exposure we suggest lightly dusting with powder.

Further information for handling is available in the separate document "Handling Guide" contained in our "internet downloads" section.

Store in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.

Unopened in original packaging storage time is minimum 1 year after shipment (under recommended storage conditions).

Cut sheet product has the print side facing downwards in the box.